DJI RONIN MX – GIMBAL

Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, and to vehicles with a minimum impact on vehicle handling.
A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin’s agility and ability to handle rapid movements or high-G situations.
Category:
General
Built-In Functions
  1. Operation Modes
    -Underslung Mode
    -Upright Mode
    -Briefcase Mode
    -Aerial Mode
    -Jib or Wirecam Mode
  2. Built-in, independent IMU module
  3. DJI Specialized Gimbal Drive Motors with Encoders
  4. Bluetooth Module
  5. USB Connection
  6. 2.4GHz Receiver
  7. Temperature Sensor
  8. DJI Advanced 32-Bit DSP Processor
  9. D-Bus Receiver Supported
Mechanical & Electrical Characteristics
Working Current
Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Run Time
3 hours
Operating Temperature
5° F ~ 120° F (-15° C ~ 50° C)
Weight
Including handle bar: 6.11 lb (2.77 kg)
Including vibration absorber: 4.74 lb (2.15 kg)
Gimbal Dimensions
Excluding handle bar :
280 mm (W) x 370 mm (D)x 340 mm (H)
Including handle bar :
560 mm (W) x 370 mm (D) x 440 mm (H)
Peripheral
Camera Tray Dimensions
Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 130mm
Maximum width: 160mm
Accessory Power Connections
12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power
4S Ronin-M Battery
Connections
2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements
Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements
iOS 7.1 or above; Android 4.3 or above
Working Performance
Load Weight (Reference Value)
10 lb (4.5 kg)
Angular Vibration Range
± 0.02°
Maximum Controlled Rotation Speed
Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s
Mechanical Endpoint Range
Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110°
Controlled Rotation Range
Pan axis control: 360°
Tilt axis control: +45° to -135°
Roll axis control: ± 25°

There are no reviews yet.

Be the first to review “DJI RONIN MX – GIMBAL”

Your email address will not be published. Required fields are marked *